
陳冬林,男,中共黨員,工學博士,Ⅱ級教授,湖南省首批“新世紀121工程”人選,享受國務院物殊津貼專家,中國電力教育協會能源動力工程學科教學委員會副主任委員,可再生能源電力技術省重點實驗室主任,湖南省電機工程學會鍋爐專業委員會副主任,長沙市能源局、長沙市發改委、湖南省發改委及省工信委特聘能源專家,博士生導師,1963年12月7日出生。
求學經歷(從本科求學經歷開始計算)。
1981.9-1985.9:華中工學院動力工程系,獲得“電廠熱能動力工程及其自動化”專業工學士學位;
1985.9-1988.5:華中理工大學能源與動力工程學院,獲得“熱能工程”工學碩士學位;
1999.7-1999.9:教育部清華大學青年骨士教師進修班學習并結業;
1999.9-2003.10:華中科技大學“煤燃燒國家重點實驗室”學習,獲得工學博士學位。
主要教授課程:
[1] 《電廠總平面CAD設計》
[1] 《能源與動力工程概論》
[2] 《燃燒理論與技術》
[3] 《能源工程管理》
[4] 《煤燃燒物理化學基礎》
[5] 《燃燒與污染》《鍋爐原理》
[6] 《循環流化床理論與技術》
主要研究方向:
[1] 燃燒理論與技術
[2] 燃燒污染物減排技術
[3] 高效傳熱與余熱利用技術
[4] 熱力系統與設備的數值模擬(CFD)優化與應用
主要科研成果介紹:
主持和參與了3項國家自然科學基金項目、20多項其他各類大型縱橫向項目,累計科研經費達2500余萬元;在《Combustion & Flame》、《Fuel》、《Applied Thermal Engineering》、《Journal of the Institute of Energy》、《中國工程熱物理學報》、《中國電機工程學報》、《動力工程學報》等國內外權威雜志及核心期刊上累計發表論文120余篇,獲國家授權發明專利25項(排名第1),獲得湖南省科技進步一等獎1項(排名第1)、二等獎3項(2項排名第1,1項排名第4),省部級三等獎2項(均排名第1),省教學成果二等獎1項(排名第1)。
主要科研論文:
[1] Chen Donglin, A self-adaptive pulverized-coal fired burner design and experimental investigation, Applied Thermal Engineering 28 (2008), 1082-1089(SCI).
[2] Donglin Chen, ChuguangZheng et al, Quasi-constant temperature combustion for improving overall performance of a coal-fired boiler, Combustion and Flame, 134/1-2 pp. 81-92, 2003. (SCI).
[3] Donglin Chen, ChuguangZheng, Experimental investigation on the feasibility of a movable heat-insulation device, Applied Thermal Engineering, 22/17 pp. 1905-1918, Dec., 2002.(SCI).
[4] Donglin Chen, ChuguangZheng, Design of microporous ceramic board based movable heat-insulating refractory device and its potential merits for coal-fired boilers, Journal of the Institute of Energy,March, 2003, 76, pp 151-158(SCI).
[5] Chen Donglin, YianXiaozhong, Liu Liang, design and experimental investigation of quasi- constant temperature device for combustion, proceedings of the international conference on energy conversion and application, June, 2001,Vol.Ⅱ(ISTP).
[6] He Jingqiao, Chen Donglin, Slagging characteristics of molten coal ash on silicon-aluminum combustion liners of boiler,Journal of Central South University, 15(6), pp 840-844, 2008/12.(SCI)。
[7] Chen Yianfei, Chen Donglin, Experimental Investigation on the Resistance of Silicon Carbide based Refractory to coal-ash Slagging, 6th Asia-Pacific Conference on Combustion, p737-740, Nagoya Congress Center, Nagoya, Japan, 20-23 May 2007(EI).
[8] Chen Donglin, Chen Yianfei, An Algebraic Thermal Calculation Method and Its Application to Determine Heat Insulation Refractory on Furnace Waterwall of a Pulverized coal Fired Boiler,International Conference on Power Engineering-2007, p204-209, Hangzhou, China, October 23-27, 2007(EI).
[9] Chen Yianfei, Chen Donglin, Study of Mechanism of Coal Ash Slagging on RefracrtoryInfuenced by Atmosphere in Furnace, Proceedings of the 6th International Symposium on Coal Combustion, p983-989, Wuhan, China, 2007/12/1(EI).
[10] Ye T ,Chen D , Zeng X . Study on the Calcination Time of V2O5-WO3-MoO3/TiO2 Catalysts for SCR DeNOx[J]. IOP Conference Series: Earth and Environmental Science, 2018, 108:052055.(SCI)
[11] Ye. T., Chen D.L., Experimental Research of an Active Solution forModeling In Situ Activating Selective CatalyticReduction Catalyst,Catalyst, 2017/8/31.
[12] 陳冬林,鄢曉忠,劉亮,燃煤鍋爐可調衛燃帶的設計與試驗研究,中國電機工程學報,p51-55, Vol.21, No7,2001 (EI)。
[13] 陳冬林,鄢曉忠,負荷自適應煤粉燃燒器可調擋板的結構特性研究,中國電機工程學報,p251-257,Vol.24,No.12, 2004(EI)。
[14] 陳冬林,基于可調衛燃帶的燃煤鍋爐燃燒穩定性分析,燃燒科學與技術, p119-122,vol.8(2002), No.6.(EI)。
[15] 陳冬林等,可調衛燃帶及其可行性試驗研究,燃燒科學與技術,p149-154,Vol.10(2004),No.2, (EI)。
[16] 葉昌,陳冬林,電站鍋爐中粉煤灰與SiC耐火材料結渣性研究,工程熱物理學報, No.05, pp 885-887, 2007(EI)。
[17] 陳冬林,鄢藍忠,張龍輝,負荷自適應射流自動偏轉燃燒器的設計與實驗研究,動力工程,Vol.24(2004), No.6,775-779。
[18] 陳冬林,李慧勇,周臻,確定燃煤鍋爐衛燃帶敷設面積的一種代數計算方法,動力工程,2006,Vol.26, No.5, 638-641。
[19] 陳冬林,鄢曉忠,夏候國偉,劉亮,燃煤鍋爐可調衛燃帶的設計與試驗研究,中國電機工程學報,Vol.21,No.7, 51-60。
[20] 陳冬林,李雅琴,下段擴容式旋風分離器分離性能的數值模擬,動力工程學報,2020,40(09):742-749。
[21] 陳冬林,魏綿源,顆粒簾換熱器中氣粒兩相換熱特性實驗研究,工程熱物理學報,2020,41(03):653-660。
Email: chendl_01@126.com
通訊地址:長沙市萬家麗南路二段960號,長沙理工大學新能源大樓2號樓515。